Справочник Пользователя для Brother PE-600II
EMBROIDERING SETTINGS ———————————————————————————————————————————————————
94
Temporary Needle Bar Setting
After embroidering begins, the machine can be stopped at a color change and a different needle bar can be
specified for the next color to be sewn.
By substituting upper thread already threaded on a different needle bar, the time for sewing can be saved. For
example, similar color thread can be substituted for temporary use.
specified for the next color to be sewn.
By substituting upper thread already threaded on a different needle bar, the time for sewing can be saved. For
example, similar color thread can be substituted for temporary use.
1
While sewing the color before the one that
you wish to change, touch
so that it
changes to
.
X
After the color currently being sewn is
finished, the threads are trimmed and the
machine stops.
finished, the threads are trimmed and the
machine stops.
• The start/stop button can be pressed at the
color change to stop the machine, but, in
that case, stop the machine after the threads
are trimmed.
that case, stop the machine after the threads
are trimmed.
2
Touch .
X
The temporary needle bar setting screen
appears.
appears.
3
Touch the key for the needle bar threaded
with the thread that you wish to embroider
with.
with the thread that you wish to embroider
with.
4
Touch .
X
The embroidering screen appears again.
5
Touch
, and then press the start/stop
button to begin embroidering.
X
Embroidering continues with the specified
needle bar.
needle bar.
Sapphire_brother.book Page 94 Thursday, November 17, 2005 3:00 PM