Справочник Пользователя для Brother PE-600II
Setting Up the Machine 7
1
Setup location
Setup the machine in a location that meets the following requirements.
• Position machine more than 50 mm (2 inches) from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk
• Use a surface that can support the weight of the machine (about 37 kg (81 Ibs.))
• Allow open space around the ventilation slots at the bottom toward the back
• Position machine more than 50 mm (2 inches) from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk
• Use a surface that can support the weight of the machine (about 37 kg (81 Ibs.))
• Allow open space around the ventilation slots at the bottom toward the back
Note
● For your safety: Since the machine weighs approximately 37 kg (81 lb.), do not set it up on an unstable
table or desk.
●
In order to prevent malfunctions or damage, do not set up the machine in a location exposed
to the following conditions.
to the following conditions.
More than
50 mm
(2 inches)
50 mm
(2 inches)
More than
350 mm
(13-3/4 inches)
350 mm
(13-3/4 inches)
More than
250 mm
(9-7/8 inches)
250 mm
(9-7/8 inches)
512 mm
(20-5/32 inches)
(20-5/32 inches)
More than
250 mm
(9-7/8 inches)
250 mm
(9-7/8 inches)
770 mm
(30-5/16 inches)
(30-5/16 inches)
589 mm
(23-3/16 inches)
(23-3/16 inches)
CAUTION
Direct sunlight
Extreme dust
Insufficient space
An unstable surface
Connection to extension
cords or multiple
adapters
cords or multiple
adapters
Extremely high or extremely low temperatures (The operating
environment should be between 5 °C (40 °F) and 40 °C (104°F)
environment should be between 5 °C (40 °F) and 40 °C (104°F)
Liquids, such as water
Blocked ventilation
slots
slots
Objects within the
moving range of the
embroidery frame
moving range of the
embroidery frame
Sapphire_brother.book Page 7 Thursday, November 17, 2005 2:44 PM