Справочник Пользователя для Brother NV4750D

SEWING THE STITCHES

tili
ty

tit

Smocking Stitches

Use smocking stitches for decorative sewing on
clothes, etc.

Select a straight stitch and attach presser
foot “J”.

Set the stitch length to 4.0 mm (approx.
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (See pages 49
through 50).

Pull the bobbin and upper threads out by
50 mm (approx. 1-15/16 inches).

Sew the seams, leaving approximately
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 1-15/16 inches).

a Approximately 10 mm (approx. 3/8 inch)

Pull the bobbin threads to obtain the
desired amount of gather, and then smooth
the gathers by ironing them.

Select

or .

Sew the spaces between the straight seams.

Pull out the straight stitch threads.

Fagoting

When there is a space between two fabrics with
thread sewn over the space to join the fabrics
together, it is called fagoting. Use this stitch when
sewing blouses or children’s clothes.

Baste two pieces of fabric onto thin paper,
leaving a space of 4 mm (approx. 3/16 inch)
between the fabrics.

a 4.0 mm (approx. 3/16 inch)
b Paper

c Basting stitches

Select

or .

Memo

For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.

Memo

For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.