Справочник Пользователя для Brother 885-V31
160
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
8
on the LCD was pressed when no card was inserted.
9
A stitch other than the buttonhole, bar tack or darning stitch was
selected and the start/stop button was pressed while the buttonhole
lever is lowered.
10
The buttonhole, bar tack or darning stitch was selected and the start/
stop button was pressed while the buttonhole lever is raised.
11
The start/stop button, reverse/reinforcement stitch button or thread
cutter button was pressed while the presser foot was raised.
12
The memory is full and the pattern cannot be saved.
13
You pressed the back key or the embroidery key when a pattern was
selected or the utility stitch key when a stitch is selected.
14
You changed the stitch pattern settings, and then tried to save them by
pressing the manual memory key.
15
You tried to select an embroidery pattern or change the layout when
the needle was down.
The machine is turned on while the needle is lowered and the
embroidery unit is attached.
16
You tried to initialize the embroidery unit with the embroidery foot
lowered.
No
Error Message
Probable Cause