Краткое Руководство По Установке для Brother UM 103D
17
Chapter
Chapter
Chapter
Chapter
Chapter
Threading the
upperlooper
•
Run the thread in the sequence illustrated, follow-
ing the green color and the numbers next to each
threading point.
ing the green color and the numbers next to each
threading point.
1
Open the front cover by sliding to the right
and guiding the top toward you.
and guiding the top toward you.
2
Pull the thread off the spool and directly up
through the thread guide on the thread tree
from back to front.
through the thread guide on the thread tree
from back to front.
3
Pull the thread about an extra 15cm (6
inches) through the front of the thread tree.
inches) through the front of the thread tree.
4
Pass the thread through the proper thread
guide.
guide.
5
Slide and hold the thread tension release
button to the right, then pass the thread
through the tension disc which is in the
channel next to the green tension adjust-
ment dial. Release the button.
button to the right, then pass the thread
through the tension disc which is in the
channel next to the green tension adjust-
ment dial. Release the button.
6
Guide the thread down the channel and
pass the thread through the threading
points next to the green color marks follow-
ing the numerical order in the accompany-
ing illustration.
pass the thread through the threading
points next to the green color marks follow-
ing the numerical order in the accompany-
ing illustration.
Enhebrado del áncora
superior
•
Enhebre el hilo según ilustrado en la secuencia,
siguiendo el color verde y los números inscritos al
lado de cada punto de enhebrado.
siguiendo el color verde y los números inscritos al
lado de cada punto de enhebrado.
1
Abra la tapa delantera deslizándola hacia
la derecha y guiando la parte superior
hacia usted.
la derecha y guiando la parte superior
hacia usted.
2
Saque el hilo del carrete y póngalo direc-
tamente por la guía de enhebrado del
árbol de enhebrado desde detrás a delan-
te.
tamente por la guía de enhebrado del
árbol de enhebrado desde detrás a delan-
te.
3
Tire del hilo otros 15 cm aproximadamente
por la parte delantera del árbol de enhe-
brado.
por la parte delantera del árbol de enhe-
brado.
4
Pase el hilo por la guía de hilo correspon-
diente.
diente.
5
Deslice y retenga el botón de liberación de
la tensión del hilo hacia la derecha, y pase
el hilo por el disco de tensión que es el
canal situado al lado del disco de ajuste de
la tensión verde. Suelte el botón.
la tensión del hilo hacia la derecha, y pase
el hilo por el disco de tensión que es el
canal situado al lado del disco de ajuste de
la tensión verde. Suelte el botón.
6
Guíe el hilo por el canal y pase el hilo por
los puntos de enhebrado al lado de las
marcas de color verde siguiendo el orden
numérico de la ilustración.
los puntos de enhebrado al lado de las
marcas de color verde siguiendo el orden
numérico de la ilustración.
2
3
4
5
6
7
8
1
2
6
4
5
2
3