Справочник Пользователя для Brother S-7000DD

 

 

S-7000DD 

12

・ 

The operation panel keys cannot be operated while sewing is in progress. 
Select the keys and set the number of stitches before starting sewing. 

・ 

In the case of keys with indicators, the indicator illuminates when that function is operating, and the indicator switches off 
when the key is pressed once more. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Power indicator 

0489D

The power indicator illuminates when the power switch is turned on. 

(1) Display 

   

・ 

When start backtack stitches are being displayed, the indicator of the start backtack key 
(4) will illuminate, and the number of A stitches will appear in the A column and the 
number of B stitches will appear in the B column.   

・ 

When end backtack stitches are being displayed, the indicator of the end backtack key 
(5) will illuminate, and the number of C stitches will appear in the C column and the 
number of D stitches will appear in the D column.   

・ 

When continuous backtack stitches are displayed, the indicator of the continuous 
backtack key (6) will illuminate, and the number of A, B, C and D stitches will appear in 
order starting from the left column of the display.   

・ 

The three indicators on the right side of the window show which value is appearing in 
the four columns of the display. The four-column display shows the speed, counter and 
stitches. When the stitches are being displayed, the ABCD indicator (10) will illuminate. 

 

(2)  SEL (Select) key 

   

The value in the display (1) can be changed each time this switch is pressed.   
 

(3) Setting 

keys 

   

These keys are used to set the number of backtack stitches for A, B, C and D. 
・ 

When the      key is pressed, the setting increases from 0 up to 9. 

・ 

If you press the key once more when “9” is displayed, the value will return to “0”. 

(4) Start 

backtack 

key 

   

When this key is pressed so that the indicator illuminates, the number of start backtack 
stitches (0 - 9) in the A and B columns of the display are sewn.   
 
 

(5) End 

backtack 

key 

   

When this key is pressed so that the indicator illuminates, the number of end backtack 
stitches (0 - 9) in the C and D columns of the display are sewn. When the treadle is 
depressed backward, the end backtack stitches are sewn and then the thread is trimmed 
automatically. 
If the treadle has not yet been depressed backward, the end backtack function can be set 
to ON, the number of stitches can be changed and the function can be set back to OFF. 
 

(6)  Continuous backtack key 

   

When this key is pressed so that the indicator illuminates, the number of backtack stitches 
(0 - 9) in the A, B, C and D columns of the display are sewn continuously. After the sewing 
machine sews a full cycle of stitches set by A, B, C and D, the thread is trimmed 
automatically. 

0490D

0491D

0492D

0493D

0494D

0495D