Справочник Пользователя для Brother 885-V12
91
4
Maintenance
Simple sewing machine maintenance operations are described below.
Cleaning the machine
surface
surface
If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a wet cloth, wipe it again with a dry
cloth.
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a wet cloth, wipe it again with a dry
cloth.
Cleaning the race
Clean the hook and under the needle plate.
Sewing performance will suffer if lint and dust
collect in the race; therefore, it should be cleaned
periodically.
Sewing performance will suffer if lint and dust
collect in the race; therefore, it should be cleaned
periodically.
a
Turn off the sewing machine, and then unplug
the power cord from the electrical outlet.
the power cord from the electrical outlet.
b
Raise the needle and presser foot lever.
c
Pull the flat bed attachment off to the left.
d
Loosen the presser foot holder screw and
remove the presser foot holder, and then
loosen the needle clamp screw and remove
the needle.
remove the presser foot holder, and then
loosen the needle clamp screw and remove
the needle.
e
Grasp both sides of the needle plate cover,
and then slide it toward you to remove it.
and then slide it toward you to remove it.
a Needle plate cover
f
Remove the bobbin case.
Grasp the front of the bobbin case, and then
pull it out.
pull it out.
a Bobbin case
g
Use the enclosed cleaning brush or a vacuum
cleaner to remove any lint and dust from the
race and its surrounding area.
cleaner to remove any lint and dust from the
race and its surrounding area.
a Cleaning brush
b Race
• Do not apply oil to the race or bobbin case.
b Race
• Do not apply oil to the race or bobbin case.
● Make sure that the sewing machine has been
turned off, and then unplug the power cord
before cleaning the machine, otherwise injuries
or an electric shock may occur.
before cleaning the machine, otherwise injuries
or an electric shock may occur.
● Do not use benzene, thinner or cleansing
powder, otherwise the machine may be
discolored or deformed.
discolored or deformed.
● Make sure that the sewing machine has been
turned off, and then unplug the power cord
before cleaning the machine, otherwise injuries
or an electric shock may occur.
before cleaning the machine, otherwise injuries
or an electric shock may occur.
CAUTION
CAUTION
a
a
a
b