Справочник Пользователя для Brother 342Fi
3. PREPARATION
BAS-341F, 342F
5
3-4. Connecting the ground wire
CAUTION
Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious
electric shock.
electric shock.
Connection method for 3-phase power supply.
3-5. V-belt tension
These should approximately 10 - 12 mm of slack when V-
belt is loaded at 9.8 N . To adjust, loosen the two nuts (1),
and shift the motor up or down.
belt is loaded at 9.8 N . To adjust, loosen the two nuts (1),
and shift the motor up or down.
3-6. Installing the foot switch
Insert the connector of the foot switch (2) into the
connector (3) of the control box (1).
connector (3) of the control box (1).
Red
White
Black
Yellow/Greeen
White
Black
Yellow/Greeen
3-phase
power supply
Yellow/Green
power supply
Yellow/Green
0064Q
Connect to
ground
ground
1923S
1924S