Инструкции Пользователя для Brother FAX-1860C

Telephone Services and External devices

If you have a Pulse dialing service, but need 
to send Tone signals (for example, for 
telephone banking), follow the instructions 
below:

a

Do one of the following:

„

(MFC-3360C and FAX-1860C)
Pick up the handset.

„

(FAX-1960C)
Pick up the cordless handset and 
press (Talk) or press 
Speaker Phone on the machine.

b

Press # on the machine’s control panel. 
Any digits dialed after this will send tone 
signals.
When you hang up, the machine will 
return to the Pulse dialing service.

When the machine is in Fax/Tel mode, it will 
use the F/T Ring Time (pseudo/double-
ringing) to alert you to pick up a voice call.

Do one of the following:

„

(MFC-3360C and FAX-1860C)
If you are at the machine you can lift the 
handset to answer.

„

(FAX-1960C)
You can press 

(Talk) on the 

cordless handset or press 
Speaker Phone on the machine.

„

If you are at an extension phone, you'll 
need to lift the handset during the F/T Ring 
Time and then press # 5 1 between the 
pseudo/double rings. If no one is on the 
line, or if someone wants to send you a 
fax, send the call back to the machine by 
pressing l 5 1.

You can change the default setting of the 
On/Off key to Fax Receive:On so that you 
can receive faxes when the power key is off. 
(See On/Off setting on page 18.)
Fax/Tel mode will work in the following ways.

„

When the machine is in Fax/Tel mode and 
pseudo/double-rings to tell you to pick up 
a voice call, you can only answer by 
picking up the machine’s handset or 
cordless handset and pressing 

(Talk).

„

If you answer before the machine 
pseudo/double-rings, you can also pick up 
the call at an external or extension phone.