Справочник Пользователя для Barco E1
How to use the on-screen display (OSD)
System manual E1
93
Input menu: Input Type
*
* This function is not available in DVI input mode.
Function
Description
G to Y
The Green video signal from the imaging
board is used as luminance value to drive
the RGB subpixels of the panel equally.
board is used as luminance value to drive
the RGB subpixels of the panel equally.
RGB to Y
The RGB video signals from the imaging
board are calculated and transformed into
a single luminance value according to the
formula 0.3R + 0.59G + 0.11B. This single
luminance signal drives the RGB sub-pix-
els of the panel equally.
Use this setting in case the imaging board
is a color board and if the signal must be
displayed in monochrome.
board are calculated and transformed into
a single luminance value according to the
formula 0.3R + 0.59G + 0.11B. This single
luminance signal drives the RGB sub-pix-
els of the panel equally.
Use this setting in case the imaging board
is a color board and if the signal must be
displayed in monochrome.
RGB to RGB
The R video signal drives the R sub-pixels,
the G video signal drives the G sub-pixels
and the B video signal drives the B sub-
pixels. This is the preferred setting for
color display controllers.
the G video signal drives the G sub-pixels
and the B video signal drives the B sub-
pixels. This is the preferred setting for
color display controllers.