Справочник Пользователя для Wegener Communications 6420

 

 

iPump 6420 User’s Manual

 

www.wegener.com 

800070-01 Rev B 

Appendix 1, Page 111 

Command - R http: Report HTTP Information 
Command - R ns: Report Network Services Status 
Command - r oar: Status of Current Active Recording 
Command - R profile: Reports all profile definitions 
Command - R p: Report Configuration Information 
Command - R r: Report Relays Status 
Command - r sched: Scheduler status 
Command - R st: Report Preset Table 
Command - R s: Report Settings Status 
Command - r trigger:                Trigger report 
Command - sched stat: Scheduler status 
Command - setlnb: Set the LNB LO Frequency 
 LO_freq   : 0 - 14000.00 MHz 
 LO_alias  : C, KU, ELKU, EHKU 
Command - SNMP community: Set SNMPv2 Community Access String 
Command - snr: margin_offset - Set SNR margin offset 
 margin_offset: 1.0 - 10.5 
Command - stat sched: Scheduler status 
Command - trigger report:                Trigger report 
Command - wan gateway: Sets the network gateway for the WAN interface 
Command - wan ip: Set the unit's static WAN IP Address 
Command - wan mode: Sets the WAN addressing mode. DHCP, STATIC, or WEG 
Command - wan setup: [ip] [subnet] Sets up IP address and subnet mask for the WAN port 
Command - wan subnet: Sets the unit's static WAN Subnet Mask 
 
addTermCmd( {"playlist", "delete"}, luaterm_delPlaylist ) 
addTermCmd( {"lua", "cmdargs"}, luaterm_dumpArgs  ) 
addTermCmd( {"lua", "test1"}, (function (argv) print("lua command, test1!!!\n"); end) ) 
addTermCmd( {"core","config"}, (function (argv) table.foreach(SYS._hidden_vals,print); 

end ) ); 

addTermCmd( {"core","build"}, (function (argv)  
addTermCmd( {"core","luaopts"}, function (argv)  
addTermCmd( "ver",       luaterm_verReport ) 
addTermCmd( "APPSTAT",       luaterm_verReport ) 
addTermCmd( "sp.",       luaterm_sp ) 
addTermCmd( "decoff",    luaterm_withDecoder( __decoff    ) ) 
addTermCmd( "decabort",  luaterm_withDecoder( __decabort  ) ) 
addTermCmd( "decrejoin", luaterm_withDecoder( __decrejoin ) ) 
addTermCmd( "decfollowtune", luaterm_withDecoder( __decfollowtune ) ) 
addTermCmd( "playfile",      luaterm_withDecoder( __playfile ) ) 
addTermCmd( { "playlist", "play" }, luaterm_withDecoder( playPlaylist ) ) 
addTermCmd( { "record", "start" }, function( argv ) 
addTermCmd( "rec1" , function( argv ) 
addTermCmd("date", function() print(os.date()) end) 
addTermCmd( { "seq", "print" },  
addTermCmd( { "seq", "validate" },