Справочник Пользователя для Brother 885-V95/V96/V97/V98
Care and Maintenance 177
5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e
Grasp both sides of the needle plate cover, and
then slide it toward you.
then slide it toward you.
a Needle plate cover
X
The needle plate cover is removed.
f
Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
Grasp the bobbin case, and then pull it out.
a Bobbin case
g
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and
bobbin thread sensor and their surrounding
area.
remove any lint and dust from the race and
bobbin thread sensor and their surrounding
area.
a Cleaning brush
b Race
c Bobbin thread sensor
b Race
c Bobbin thread sensor
Note
z Do not apply oil to the bobbin case.
z If lint or dust collects on the bobbin thread
z If lint or dust collects on the bobbin thread
sensor, the sensor may not operate correctly.
h
Insert the bobbin case so that the U mark on
the bobbin case aligns with the { mark on the
race.
the bobbin case aligns with the { mark on the
race.
• Align the U and { marks.
a
U mark
b
{ mark
c Bobbin case
• Make sure that the indicated points are
aligned before installing the bobbin case.
i
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover back
on.
the needle plate, and then slide the cover back
on.
a Needle plate cover
CAUTION
a
a
a
b
c
a
b
● Never use a bobbin case that is scratched.
Otherwise, the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XE7560-001
(green marking)), contact your nearest
authorized service center.
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XE7560-001
(green marking)), contact your nearest
authorized service center.
● Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
a
b
c
a