Справочник Пользователя для Brother BCL-D20

General Information

f

Enter the registered 4-digit PIN number 
of the machine (base unit) (The factory 
setting is “0000”.) by pressing the dial 
pad on the control panel of the cordless 
handset.
Press Menu/OK.

• If you hear three short beeps, the cordless 

handset did not register. Try to register the 
cordless handset again.

• If you want to install another cordless 

handset, repeat steps b through f.

• You can change the PIN number. (See 

Modify PIN on page 24.)

• You may register GAP (Generic Access 

Profile) compatible DECT™ handsets to 
your machine (base unit). Follow steps a 
and b, then refer to your handset 
documentation to complete the 
registration. Functions are limited to 
making and receiving external calls. Some 
handsets may not work with your 
machine.

 

g

Press Stop/Exit on the control panel of 
the machine (base unit).

a

Press Menu on the control panel of the 
machine (base unit).

b

Press a or b to choose 
Initial Setup.

Press OK.

c

Press a or b to choose 
Register Handset.

Press OK.

d

Press a or b to choose Register.

Press OK.
The machine (base unit) searches for 
the cordless handset. 

e

Press Menu/OK on the cordless 
handset.

f

Press a or b to choose Register HS.

Press Menu/OK.

g

Press a or b to choose Base1, Base2, 
Base3 or Base4.

Press Menu/OK.

• If you have already registered the handset 

to a base unit, make sure you choose a 
base unit number that is not being used. 
For example, if you register the handset to 
an additional base unit and you choose 
Base1, the base unit previously stored in 
Base1 will be overwritten and the handset 

will no longer be connected to it.

• Your machine (base unit) is already stored 

as Base1 on the included handset.