Справочник Пользователя для Brother fax560

A U T O   D I A L   N U M B E R S   A N D   D I A L I N G   O P T I O N S      

Pick up the handset—OR—Press 

When you hear a dial tone, press 

, press 

, then press the two-

digit Speed Dial number.

If you pressed 

 to dial the call, pick up the handset when the other party answers. 

(The speaker works only one way; the other party won’t be able to hear you unless you 
pickup the handset.)

To hang up a voice call, replace the handset. 

Sometimes you may want to choose from among several long distance carriers when 
you make a call. Rates may vary depending upon the time and destination. To take 
advantage of low rates, you can store the access codes or long-distance carriers as One 
Touch and Speed Dial numbers. You can store these long dialing sequences by 
dividing them and setting them up separately in any combination. You can even 
include manual dialing using the dial pad. The combined number will be dialed in the 
order you entered it, as soon as you press 

. Make sure you selected CHAIN as 

the type of the number when you store it into the One Touch or Speed Dial.  (See 
Storing One Touch Dial Numbers and Storing Speed Dial Numbers, page 7-1 to 7-2.)

For example: 

You store “555”on One Touch key 

 and “7000”on One Touch key 

. If you press 

One Touch 

, 

 and 

 you will dial “555-7000”. To temporarily change a 

number, you can substitute part of the number with manual dialing using the dial pad. 
For example, to change the number to 555-7001 you can press One Touch 

 and 

press 

, 

, 

, 

 using the dial pad. 

If you are sending a fax, press 

 after entering the Speed Dial number. If you 

picked up the handset, press 

 when the receiving fax machine answers with fax 

tones.

The CallManage access code can save you money on long distance calls (for details, 
see CallManage, page 8-5). (For USA Only)

Pause after dialing Speed Dial numbers for the name to be displayed before you enter 
the next portion of the dialing sequence.