Справочник Пользователя для Brother FAX-8360P

Follow the commands below to access features remotely. When you call the machine and enter your 
Remote Access Code (the factory setting is 1 5 9 

), the system will signal you with two short beeps 

to enter a remote control command.

Press 9 5

Turn Fax Forwarding OFF—Press 1.

Turn Fax Forwarding ON—Press 2.

Program Fax Forward Number—Press 4. Automatically turns Fax Forwarding ON.

Turn Fax Storage ON—Press 6.

Turn Fax Storage OFF—Press 7. (This is only possible if there are no faxes stored in the memory, 
or if all faxes have been erased using Remote Control 9 6 3).

Press 9 6

Retrieve all faxes—Press 2, then enter the number of remote fax machine and then press # #. After 
the beep, hang up and wait.

Erase all fax messages—Press 3. If the data stored in the memory has not been printed before, it 
will be printed first and then erased.

Press 9 7

1 long beep—Received fax messages.
3 short beeps—No messages.

Press 9 8

TAD—Press 1.

F/T (FAX/TEL)—Press 2.

FAX—Press 3.

Press 9 0