Справочник Пользователя для Brother FAX-8360P

Poor transmitting quality

Try changing your resolution to FINE or SUPERFINE. (See Fax 
Resolution, page 21.) Make a copy to verify the machine’s scanner 
operation.

Transmission verification 
prints “Results:NG”

There is probably temporary noise or static on the phone line. Try 
sending the fax again. If the problem continues, call the Telephone 
Company to check your phone line.

When the receiving party says 
the picture is not clear

Sometime the resolution mode you choose when sending a fax may 
not be appropriate. Send the fax again, but try using a different 
resolution mode (FINE or S.FINE). Also, make sure the machines 
scanner glass is clean and that there are no marks on it. If there is, 
then clean the glass cover.

When the receiving party says 
vertical streaks appear on the 
faxes they receive

The machine’s scanner may be dirty or the receiving party’s print 
head may be dirty. Clean your scanner and make a copy to check if 
the problem was caused by the machine.

F/T pseudo-ring in Fax/Tel 
(F/T) Mode.

The machine knows the incoming call is not a fax so it is signalling 
you to answer the telephone call. Pick up the external telephone’s 
handset and press Tel or answer from an extension phone and press 
the machine’s Deactivation Code (default setting is #51).

Transferring a fax call to the 
machine.

If you answered at the machine, press Fax Start and hang up 
immediately. If you answered at an extension phone, press your 
Remote Activation Code (default setting is 

51). When the 

machine answers, hang up.

The machine does not load 
paper. The LCD shows 
CHECK PAPER or 
PRINTER JAM 

Check to see if the CHECK PAPER or PRINTER JAM message 
appears on the LCD. If so, the paper tray may be out of paper. If it 
is empty, load a new stack of paper into the tray. If there is paper in 
the paper tray, make sure it is straight. If the paper is curled, you 
should straighten it. Sometimes it is helpful to remove the paper, 
turn the stack over and put it back into the paper tray. Reduce the 
amount of paper in the paper tray, then try again.

How can I clear paper jams?

Vertical streaks appear in 
copies

Sometimes you may see vertical streaks on your copies. Either the 
scanner or the primary corona wire for printing is dirty. Clean them 
both.