Справочник Пользователя для Wacom Intuos - 3 for Windows & Macintosh

61

61

If you encounter problems with your Intuos3 tools or tablet, refer to the following tables.  Your problem may 
be described here, and you can try the solution offered.  Be sure you refer to the Read Me file for the latest 
information updates.

For additional information, visit Wacom’s web site at http://www.wacom.com/productsupport and follow the 
links to the FAQs.

The computer does not 
have an available USB 
port.

Check if there is an available USB port on a powered USB hub.  If not 
available you will need to add a powered USB hub or USB card.

The tablet status LED is 
off.

Verify that your tablet’s USB cable is plugged into a primary USB port 
(directly into your computer) or into a powered USB hub.  If you are 
connecting to a powered USB hub device, make sure the hub is connected 
to an active USB port and that the hub is active.

After plugging in the tablet, 
a message appears 
indicating that the USB 
device needs more power 
than is available.

Make sure the tablet is plugged into a primary USB port on your computer 
or into a powered USB hub attached to your computer.

The pen works only in 
M

OUSE

 mode, and does 

not draw with pressure-
sensitivity.

The tablet driver software was not installed or did not load properly.   
Make sure the tablet driver software is installed and functioning.  Insert the 
Wacom Tablet CD into your computer and install the driver software for the 
tablet.

The pen does not draw 
with pressure-sensitivity.

Some applications require that you turn on the pressure capabilities within 
the application or selected tool before the pen will respond as a pressure-
sensitive tool.

Clicking is difficult.

Try using a lighter T

IP

 F

EEL