Справочник Пользователя для Wizcom InfoScan TS Elite

The Pen Applications 

30 

The following screen should appear: 

 

Scan to PC in non-Auto Send mode 

 Scanning Tips: In non-Auto Send mode, if the 

scanning results are bad, simply scan again before you send 
the text, and the text on screen will be replaced with the 
newly scanned text. This is not possible in Auto Send 
mode, as the text is sent immediately to the PC. 

3.  Make sure the same Microsoft Word file as before is 

open on the PC and that the blinking cursor is visible. 

4.  On the Pen select Send by either tapping on it with the 

stylus or pressing the Enter key. 

5. The 

'

Sending...' box should appear on the Pen screen. 

The scanned text is sent to the PC with the following result: 

 

The scanned text appearing in the MS Word file