Справочник Пользователя для Wizcom InfoScan TS Elite

Скачать
Страница из 46
Tips 
43 
b. The Add New Hardware Wizard should appear. 
c. Select the recommended path for installing the 
driver. 
d. During the installation, a pop up message appears 
warning that the driver has 'not passed Windows 
Logo testing' - select Continue Anyway
e. Complete the Add New Hardware Wizard
3.  The PC connector side of the USB cable is connected 
to a USB port on your PC 
4.  The Pen connector side of the USB cable is connected 
to the USB outlet on the Pen Top Panel.  
If you have followed all the above steps and you are still 
having problems, it may be that the WizCom Pen USB 
Driver has only been partially installed. To rectify this: 
1.  Make sure the Desktop is NOT running (if you can see 
the icon   in the notification area of the Windows 
taskbar, right-click on it and select Exit to completely 
shut down the application). 
2.  Connect the Pen to the PC with the USB cable as 
explained above in steps 3 and 4. 
3.  Access the Windows Device Manager as follows: 
a.  Right click the My Computer icon from the 
Windows desktop. 
b. Select Properties
c. Select the Hardware tab. 
d. Click on Device Manager
(Alternatively, from the Windows taskbar, go to 
Start/Settings/Control Panel and click on 
System/Hardware/Device Manager). 
4. Open 
the 
Imaging Devices folder of the Device 
Manager
5. If 
the 
WizCom Pen appears listed - with a yellow 
exclamation mark 
- it means the driver has not been 
successfully installed.  
6.  Right click this icon and select Update Driver