Справочник Пользователя для Southbend SB1023

For Machines Mfg. Since 8/09

Model SB1023

-17-

The purpose of the operation section is to 

familiarize you with the basic controls, 

terminology, capabilities, and adjustments that 

are necessary to use this machine. 

To better understand the remaining parts of 

this section, please take a moment to read this 

overview.

1.  Examines the grinding wheel to make sure it 

is suitable for use t

2.  Examines the workpiece to make sure it is 

properly prepared for grinding.

3.  Uses the elevation handwheel to raise 

the grinding wheel assembly to provide 

clearance for mounting the workpiece.

4.  Wipes the table surface clean to remove any 

debris that may interfere with the clamping 

process.

5.  Uses a magnetic chuck to hold the workpiece 

to the table, then turns the elevation 

handwheel to lower the grinding wheel to 

just above the top surface of the workpiece.

6.  Turns the grinder ON, then stands aside 

while the wheel reaches full speed.

7.  Performs the grinding operation. 

 

Note: Because the method for performing 

8.   When the grinding operation is complete, 

turns the grinder OFF and allows the 

grinding wheel to come to a complete stop.

9.  Removes the workpiece from the table.