Справочник Пользователя для Southbend SB1023

-30-

For Machines Mfg. Since 8/09

Model SB1023

To keep this machine in the best operating 

condition, make sure to complete the follow-

ing maintenance items within the minimum 

intervals listed below.

•  Check for and correct loose mounting bolts.

•  Check for and correct damaged or cracked 

grinding wheel.

•  Check for and correct worn or damaged 

wires.

•  Clean and protect table.

•  Vacuum metal shavings from machine.

•  Correct any other unsafe condition.

•  Remove the table, clean and relubricate the 

ways, ball bearings, and rack and pinion.

•  Lubricate the column grease fitting with two 

pumps of grease.

•  Lubricate the table cross way grease fitting 

with two pumps of grease.

•  Clean and grease all three leadscrews.

If this machine is used in a heavy industrial 

setting, or in a dirty or damp environment, 

increase the lubrication intervals. 

1.  DISCONNECT MACHINE FROM POWER!

2.  Clean the upper column leadscrew section 

with mineral spirits, dry with a rag, and 

relubricate with any standard machine or 

multipurpose grade grease (Figure 37).

3.  Wipe the column grease fitting clean (see 

Figure 37) and pump the fitting with two or 

three pumps of grease. Wipe off any grease 

that bleeds through the seams.