Справочник Пользователя для Sony Water Dispenser 2

205

Setup Relating to Operations From the Control Panel

  

Ch
apt

er 16 

E

ngin

eering Se

tup

To carry out the overall control panel settings, use the Panel>Config menu.

In the Engineering Setup menu, select VF2 ‘Panel’ and HF1 ‘Config.’
The status area shows the “Bank numbers 1 to 4” (physical locations) of the 
operating banks, the allocated operating bank names, and whether or not 
operation is enabled.

Use the following procedure.

In the Panel>Config menu, select the Bank you want to set, using either of 
the following methods.

• Press directly on the status area display.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.

The Bank selection here indicates the physical position on the control 
panel, numbering from the top as the 1st Row, 2nd Row, 3rd Row, and 4th 
Row.

Select the operating bank that you want to assign to the selected Bank 
number in the <M/E Assign> group.

The status area shows the interchanged state of the operating banks.

It is not possible to assign the same M/E logical bank to more than one 
physical bank. Be sure to make different M/E assignments.

1

Bank

Select the position of the operating bank 
you want to set

1 to 4