Справочник Пользователя для Sony Water Dispenser 2

253

Setup Relating to Switcher Processor

  

Ch
apt

er 16 

E

ngin

eering Se

tup

In the <Bus> group, select any of the following.

Enable: Enable the GPI link setting for the selected bus.
Disable: Disable the GPI link setting for the selected bus.
All Enable: Enable the GPI link setting for all buses.

Use the following procedure.

In the GPI Link Adjust menu, turn the knobs to select the output port for 
which you want to set the delay value, and the corresponding delay value.

Press [Delay Set].

This confirms the delay value, which is reflected in the status area.

To carry out setup relating to connections with external devices, display the 
Switcher>Device Interface menu.

In the Engineering Setup menu, select VF3 ‘Switcher’ and HF7 ‘Device 
Interface.’

The description in this section takes the REMOTE3 port as an example. For 
other REMOTE ports, carry out the same process as required.

In the Switcher>Device Interface menu, press [Remote Assign].

The Remote Assign menu appears.

4

Bus

Bus selection

1 to 112

1

GPI Port

GPI output port for the 
setting

1 to 8

5

Delay

Delay value for the output 
port

0 to 300 (fields)