Справочник Пользователя для Sony Water Dispenser 2
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
260
Setup Relating to DME
Setup Relating to DME
Settings Relating to Signal Inputs (Input Menu)
To make settings relating to DME input signals, display the DME>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF4 ‘DME’ and HF1 ‘Input.’
The status area shows the initial crop information.
In the following, the settings for DME1 are explained. (It is not necessary to
make settings for DME2.)
The status area shows the initial crop information.
In the following, the settings for DME1 are explained. (It is not necessary to
make settings for DME2.)
Setting the initial crop
Use the following procedure.
1
In the DME1 <Aspect> group, select the screen aspect ratio (16:9 or 4:3).
2
In the DME1 <Crop> group, press [Initial Crop] and adjust the following
parameters.
parameters.
If you selected 4:3 in step
2
If you selected 16:9 in step
2
To return the parameter values to their default values
Press [Unity] in the <Crop> group.
Press [Unity] in the <Crop> group.
Knob
Parameter
Adjustment
Setting values
1
Top
Position of top side
–3.00 to +3.00
2
Left
Position of left side
–4.00 to +4.00
3
Right
Position of right side
–4.00 to +4.00
4
Bottom
Position of bottom side
–3.00 to +3.00
Knob
Parameter
Adjustment
Setting values
1
Top
Position of top side
–9.00 to +9.00
2
Left
Position of left side
–16.00 to
+16.00
+16.00
3
Right
Position of right side
–16.00 to
+16.00
+16.00
4
Bottom
Position of bottom side
–9.00 to +9.00