Справочник Пользователя для Sony Water Dispenser 2

265

Setup Relating to DCU

  

Ch
apt

er 16 

E

ngin

eering Se

tup

For setup relating to DCU, it is necessary to make the same settings on multiple 
control panels (maximum three units) that are sharing the DCU. After carrying 
out the DCU setup on one control panel, make the same settings on the other 
control panels.

The DCU parallel input ports are assigned with the following priority 
sequence.

1. When external boxes are set in the Router/Tally>Router>External Box 

Assign menu, the parallel inputs are assigned to the external box inputs in 
order.

2. When tally settings are carried out in the Router/Tally>Tally Enable menu, 

tally inputs are assigned automatically.

In this menu, you set only the input ports which are unused after making the 
above assignments.
To assign GPI inputs to DCU parallel input ports, display the DCU>Input 
Config menu.

In the Engineering Setup menu, select VF5 ‘DCU’ and HF1 ‘Input Config.’
The status area shows input port information.

Use the following procedure.

In the DCU>Input Config menu, select what the setting applies to (DCU1 
or DCU2) from the <DCU Select> group.

In the <Parallel Input Assign> group, press [GPI Input].

Using any of the following methods, assign the number of the GPI input to 
the input port.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.