Справочник Пользователя для Sony Water Dispenser 2
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
284
Setup Relating to Router Interface and Tally
4
When you selected Tally Input as the tally generation mode in step
3
,
select any of the following in the <Tally Input> group.
DCU1: Generate tally with reference to signal input to DCU1 port. Set the
port number with the knob.
DCU2: Generate tally with reference to signal input to DCU2 port. Set the
port number with the knob.
5
Turn the knob to select the tally input port number.
6
Press [Execute].
This sets the settings made in steps
2
to
5
as the settings for tally
generation.
Modifying tally generation
Use the following procedure.
1
In the Router/Tally>Tally Enable menu, press [Modify].
The Modify menu appears.
2
With reference to steps
2
to
5
in the preceding section “Making new tally
generation settings,” change the parameters as required.
3
Press [Execute].
This modifies the tally generation settings.
Deleting tally generation settings
Use the following procedure.
1
Using either of the following methods in the Router/Tally Enable menu,
select the tally generation entry you want to delete.
select the tally generation entry you want to delete.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Press the arrow keys to scroll the reverse video cursor.
2
Press [Delete].
This deletes the selected tally generation entry.
Knob
Parameter
Adjustment
Setting values
5
Input No
Tally input port number
1 to 102