Справочник Пользователя для Sony ICD-PX312M
112
GB
It takes a long time for the IC
recorder to start.
recorder to start.
• If the IC recorder is required to process a large amount of data, it
may take longer for the IC recorder to start. This is not a
malfunction of the IC recorder. Wait until the start-up display
disappears.
malfunction of the IC recorder. Wait until the start-up display
disappears.
The IC recorder does not
operate.
operate.
• You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 84).
memory (page 84).
The IC recorder does not
operate, even if you press
any button.
operate, even if you press
any button.
• The batteries are weak (page 12).
• The power to the IC recorder is off. Slide the
• The power to the IC recorder is off. Slide the
HOLD•POWER
ON/OFF
switch in the direction of “
POWER ON/OFF
” for
more than 1 second (page 13).
• The HOLD function is activated. Slide the
HOLD•POWER ON/
OFF
switch in the center direction (page 10).
No sound comes from the
speaker.
speaker.
Sound comes from only one
channel.
channel.
• When audio output of an external device connected to the IC
recorder is monaural and the recording mode is set to
“192kbps(MONO)” (SHQ) or “128kbps(MONO)” (HQ), sounds
are recorded only in one channel. In this case, set the recording
mode to “48kbps(MONO)” (SP) or “8kbps(MONO)” (LP) in the
menu (page 79).
“192kbps(MONO)” (SHQ) or “128kbps(MONO)” (HQ), sounds
are recorded only in one channel. In this case, set the recording
mode to “48kbps(MONO)” (SP) or “8kbps(MONO)” (LP) in the
menu (page 79).
Sound comes from the
speaker even when the
headphones are plugged in.
speaker even when the
headphones are plugged in.
• If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
then insert them securely.
The operation indicator does
not light.
not light.
• “LED” is set to “关.” Display the menu and set “LED” to “开”
(page 81).
“存储容量已满” is
displayed and you cannot
start recording.
displayed and you cannot
start recording.
• The memory is full. Erase some of the files (page 27) or erase all
the files after you store them on the other memory media or on
your computer.
your computer.
Symptom
Remedy