Инструкции Пользователя для Rover 75
Instruments
75
2
Service interval display
NOTE: After the completion of
each service, the dealer will reset
the distance display, to
commence the countdown to the
next service.
each service, the dealer will reset
the distance display, to
commence the countdown to the
next service.
This shows the distance remaining before the next oil service
or inspection is due. When the starter switch is initially turned
to the second position, the service type and remaining
distance are displayed for approximately four seconds, after
which the display reverts to show the odometer, trip recorder
and external temperature readings.
or inspection is due. When the starter switch is initially turned
to the second position, the service type and remaining
distance are displayed for approximately four seconds, after
which the display reverts to show the odometer, trip recorder
and external temperature readings.
Three types of service information can be notified to the
driver:
driver:
1.
Distance until next oil service is due.
2.
Distance until next inspection is due.
3.
Brake fluid change is due (clock symbol).
For detailed information about the service interval display,
refer to ‘Routine servicing’ in the ‘Maintenance’ section.
refer to ‘Routine servicing’ in the ‘Maintenance’ section.
Gear display (automatic transmission only)
This shows the current gear lever position and transmission
mode. Sport mode is indicated by an ‘S’ and snow mode is
indicated by a snowflake symbol. An automatic gearbox fault
is indicated by the letters ‘EP’ (Emergency Programme)
appearing.
This shows the current gear lever position and transmission
mode. Sport mode is indicated by an ‘S’ and snow mode is
indicated by a snowflake symbol. An automatic gearbox fault
is indicated by the letters ‘EP’ (Emergency Programme)
appearing.
External temperature display
DO NOT alter the external
temperature reading
temperature reading
while driving - the starter switch
must NEVER be turned off while
the car is in motion.
must NEVER be turned off while
the car is in motion.
This is displayed when the starter switch is in the first or
second position (except during the initial four second
warm-up period). The external temperature mode can be
switched between °C or °F by waiting until the car is
stationary and then pressing and holding the trip recorder
reset button while, turning the starter switch off at the same
time.
second position (except during the initial four second
warm-up period). The external temperature mode can be
switched between °C or °F by waiting until the car is
stationary and then pressing and holding the trip recorder
reset button while, turning the starter switch off at the same
time.