Руководство Пользователя для Raymarine Ray48

10

The following describes the functional characters on the Ray48's LCD.

1

SCAN:  Will flash by itself when All-Scan mode is to be initiated or will flash in
unison with "MEM" when Memory Scan mode is to be initiated.

2

1 W (High/Low Power):  Will be displayed when the transmitter circuits are
providing 1 Watt of power to the antenna. When the transmitter is supplying 25 Watts

to the antenna, the "1 W" indication will be extinguished.

3

ALT (Weather Alert):  Will blink when a Weather Alert Tone has been detected.

4

WX (Weather):  Will be displayed when the channel selected to be monitored is a

weather channel.

5

MON (Monitor):  Will be displayed when the MON/INT key is pressed. This

indicates the radio is in the MONITOR mode.

6

INT (International/USA):  Will be displayed when International channels are
programmed for use. "INT" is not displayed when US channels are programmed for

use.

7

TX (Transmit):  Will be displayed on the LCD when the Push-To-Talk (PTT) switch

is depressed indicating the transmitter circuits are providing a signal to the antenna.

8

MEM (Memory):  Will be displayed when the SCAN key is pressed and held for two

seconds, or when the radio is programmed to the MEMORY SCAN mode.

9

LCD Segments:  Will display channel number in use.