Справочник Пользователя для ZyXEL STB-1001S2
Chapter 1 Introducing the STB
STB-1001S2 User’s Guide
18
1.2 LEDs
This section describes the LEDs (lights) on the front of the STB.
Figure 2 LEDs
1.3 Rear Panel Connections
This section describes the rear of the STB.
Table 1 LEDs
LED
STATUS
DESCRIPTION
POWER
On
Blinking
The STB is starting up, or is in standby mode.
Green
The STB is on and ready to use.
Off
The STB is not receiving power, or has malfunctioned.
LAN
On
Green
The STB has an Ethernet connection to the network on
the LAN port.
the LAN port.
Blinking
Green
The STB has an Ethernet connection to the network on
the LAN port, and is transmitting or receiving data.
the LAN port, and is transmitting or receiving data.
Off
The STB has no network connection on the LAN port.
REMOTE
Blinking
Green
The Infra-red receiver on the front of the STB is
receiving signals from the remote control.
receiving signals from the remote control.
Off
The Infra-red receiver on the front of the STB is not
receiving signals from the remote control.
receiving signals from the remote control.