Справочник Пользователя для ZyXEL STB-1001S2

 Chapter 2 The Menu System

STB-1001S2 User’s Guide

Use this menu to set up the STB’s IP address, media server information, and homepage.

This menu differs according to the Mode you select. 

• Select DHCP to have the STB obtain a dynamic IP address automatically from a DHCP 

server. See 

. DHCP is the default setting.

• Select Static to assign an IP address to the STB. See 

.

• Select PPPoE to use a Point-to-Point Protocol over Ethernet service. See 

.

Select DHCP in the Network menu. The following menu displays.

Figure 12   The Network: DHCP Menu 

The following table describes the labels in this menu.

MAC Address

This shows the hardware Media Access Control address of the 
STB.

IP Address

This shows the IP address currently assigned to the STB. You can 
change this in the Advanced Setup: Network menu.

STB Version

This shows the firmware version running on the STB. Check this 
before you upload new firmware.

Bootloader

This shows the version number of the software that loads the 
STB’s operating system on startup.

Kernel

This shows the version number of the code that controls the STB’s 
basic operations.

Rootfs

This shows the version number of the STB’s filesystem code.

Apps

This shows the version number of the STB’s software applications.

Table 6   The Information Menu

Table 7   The Network: DHCP Menu

Mode

Select DHCP to have the STB obtain an IP address automatically.

STB Server

Enter the IP address of the media server which supplies TV and 
video to the STB.