Справочник Пользователя для Zonet Technology Zonet ZPW4000
802.11n Wireless Print Server User Manual
48
TCP/IP Setup:
1.
Click Setup, it then appears the sub-menu.
2.
Click TCP/IP, it then as shown in the following picture.
DHCP/BOOTP:
This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print
server to obtain IP-related settings automatically from your DHCP
server.
DHCP/BOOTP server on your network. This option allows the print
server to obtain IP-related settings automatically from your DHCP
server.
IP Address:
This option allows you to input IP address from the print server. The
IP address must meet the IP addressing requirements of the network
segment.
IP address must meet the IP addressing requirements of the network
segment.
*Note:On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
Subnet Mask:
This option allows you to input subnet mask from the print server. The
IP address must meet the IP addressing requirements of the network
segment.
IP address must meet the IP addressing requirements of the network
segment.
Default Router:
This option allows you to input gateway from the print server. This IP
address of gateway must meet the router or gateway to go across of
the network segment.
address of gateway must meet the router or gateway to go across of
the network segment.