Справочник Пользователя для Zhone 4929 DSLAM

30

4929 DSLAM Installation and User’s Guide

4929-A2-ZN20-30

You can use the COM port to directly connect a PC, terminal, or modem, 
permitting use of the Command Line Interface (CLI). 

To connect a terminal or PC to the COM port:

1 Configure the terminal or terminal emulation program to use the 

following parameters:
— Maximum speed: 9600 bps
— Data bits: 8
— Parity: None
— Flow Control: None
— Stop bits: 1

2 Determine and procure the proper Data Terminal Equipment (DTE) cable 

type. The COM port requires an RJ45-type plug connector. The other 

connector depends on the serial port on your terminal or PC. See 

.

3 Connect the modular plug of your cable to the COM port socket. 

4 Connect the other end of the cable to the serial port of your terminal or 

PC.

05-17620

4929