Справочник Пользователя для Z-Com ZMAX-8210-E

 

‚ 

Click“Upload”to enable the file to be loaded to your ZMAX-8210. 

‚ 

Reboot your ZMAX-8210 and check whether the firmware has been upgraded in the Basic 

Information. 

  Upgrade firmware via FTP 

‚ 

Enter the command ftp 192.168.1.1，admin and password. 

‚ 

After successful commanding, enter“put mercury.rmt”. If the upgrade is successful, the 

information will be shown as below. 

 

‚ 

The ZMAX-8210 will be forced to reboot. 

 

 

Warning：

C:\>ftp 192.168.1.1 

Connected to 192.168.1.1. 

220 (vsFTPd 1.1.3) 

User (192.168.1.1:(none)): admin 

331 Please specify the password. 

Password: 

230 Using binary mode to transfer files. Login successful. Have fun. 

ftp> put mercury.rmt 

200 PORT command successful. Consider using PASV. 

150 Ok to send data. 

226 File receive OK. 

ftp: 发送 4075528 字节，用时 0.39Seconds  10423.35Kbytes/sec. 

ftp> quit 

221 Goodbye. 

  When upgrading the firmware via FTP, the file name shall be mercury.rmt. 

  When upgrading, neither the ZMAX-8210, nor other devices connected to the 

infrastructure are allowed to be closed.   

It is strongly recommended that you’d better back up some important files in case of something 

unexpected. If tragedy hits the ZMAX-8210, you have access to restore the important files by the 

backup. The ZMAX-8210 provides two ways to restore the backup. 

  Backup and Retrieve Files via Web  ： 

Chapter 5 

                                                                                                                                              -  22  -