Справочник Пользователя для VIZIO TL-WR641G

 

 

- 34 - 

To modify or delete an existing entry: 

1. Click 

the 

Modify in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page and click the Previous button to return to the 

previous page. 

For example: If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be 

able to access the router. The wireless station B with MAC address 00-0A-EB- 00-07-5F not be 

able to access the router, and the wireless station C with MAC address 00-0A-EB-00-07-8A be 

able to access the router when its WEP key is 2F34D20BE2E 54B326C5476586A, while all other 

wireless stations cannot access the router, you should configure the Wireless MAC Address 

Filtering list by following these steps: 

1. Click 

the 

Enable button to enable this function. 

2.  Select the radio button: Deny the stations not specified by any enabled entries in the 

list to access for Filtering Rules. 

3.  Delete all or disable all entries if there are any entries already. 

4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC 

Address field, enter wireless station A in the Description field, select Allow in the 

Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and 

the Return button. 

5. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the MAC 

Address field, enter wireless station B in the Description field, select Deny in the 

Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and 

the Return button. 

6. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A in the MAC 

Address field, enter wireless station C in the Description field, select 128-bit  in the 

Privilege pull-down list, enter 2F34D20BE2E54B326C5476586A in the WEP Key field and 

select Enabled in the Status pull-down list. Click the Save and the Return button. 

The filtering rules that configured should be similar to the following list: