Справочник Пользователя для Viper G5102V

23

© 2008 Directed Electronics. All rights reserved.

At anytime during the next 10 seconds, press and 
release the Valet switch. Now the Status LED lights 
constantly if you have entered Valet® Mode, and 
go out if you have exited Valet Mode.

To enter or exit Valet mode with the remote control:
Press

two  times,  and  then 

  to  put  the  system  into/out  of  Valet 

Mode.

 

Note:

 The LED on the control center turns on solid when in Valet Mode 

and shuts off when exiting Valet Mode.

➤

 Remote feature programming

The remote control has a menu for configuring user features. Before you 
start make sure the keypad is unlocked. (See page 13) 

To program the remote user features:

 

Press and hold the 

1. 

 button on the remote for 12 seconds. (ig-

nore the car indicator at 3 seconds). The remote emits one long 
beep, and the trasmit LED turns on to indicate the  Main Menu.
Press and hold the 

2. 

 button for 1. 5 seconds: The remote beeps 

two-tmes. You are now in the Remote Configuration menu.

To configure the remote control features: 

Press, and then release the command button. The remote beeps to 

1. 

indicate the feature configuration. 
Press the 

2. 

 button to access the Auto keypad lock feature. 

Press the  

3. 

A U 

X

 button to change the Auto keypad lock feature.

When  the  remote  beeps  once  the  keypad  automatically  locks 

• 

6o  seconds  after  the  last  button  operation  to  avoid  accidental