Справочник Пользователя для Viper MF-105B

4.   Connect an instrument cable from the LEFT/MONO jack to a 
line-level input on your amp or mixer. Turn the volume control on 
your amp down but not off. 

5. Connect an instrument cable from your signal source to the 
AUDIO IN jack. You can feed virtually any instrument-level 
or line-level signal through your MF-105B. Examples are bass, 
keyboard, theremin, drum machine, or effects send output on your 
mixer. Play your instrument (or turn on the signal source). Adjust 
the volume control on your monitor amp so that the sound level is 
comfortable.

              Figure 2 - Basic Settings

6. Now set the MF-105B panel 
controls as follows (See Figure 
2):
 

 

 

PATTERN 

 

2 

 

ENVELOPE   

2

RATE   

 

6

MIX   

 

10

BANK A/B   

A 

 

Filter Sliders 1-8  

All the  

 

 

 

way up.

    Press the stomp switch. The BYPASS light will now turn green.  
Playing your instrument, set the DRIVE control so that the DRIVE 
indicator lights up yellow most of the time. You will also hear the 
filtered signal. Adjust the OUTPUT control so the Bass MuRF’s 
effected signal is about the same loudness as the bypassed signal.

7) Continue to play your instrument, holding sustained notes or 
extended sounds. Your instrument’s signal is going through the 
Bass MuRF’s filters. Listen to how it affects the quality of your