Инструкции Пользователя для Viper Color OLED 2_Way

Configurations

Placing the system into the remote pair mode
1.  Open one or more of the vehicle doors.
2.  Turn the ignition to the On position.
3.  Press, release, then press and hold the Control button (on Con-

trol Center).

4. The control center LED begins to ﬂash and the siren emits one

chirp to conﬁrm the system is in Pair mode, the Control button
can be released. The system will stay in Pair mode for 60
seconds or until the doors are closed or ignition turned off.
The siren will emit one short and one long chirp when it exits
remote pair mode.

1. Toggle to

Remote Pair

and press the menu wheel, the

Remote

Pair

screen with on-screen instructions is displayed.

2. Press and hold the

button. The remote’s LED ﬂashes, then

the siren chirps, and remote tones play to conﬁrm pairing. The

PAIRING SUCCESSFUL

screen is displayed before returning to the

Adjustments feature menu screen.

3. If the remote does not learn the system ID it displays the

PAIRING FAILED

screen after the button is released before re-

turning to the Remote Pair screen. Press and hold the
button to try again. If the siren chirps but remote tones are not
played, Press and hold the

button to try again until the

tones are played. If the siren does not chirp shortly after the
remote LED begins ﬂashing make sure the system is in remote
pair mode.

Sensor Adjust

Your Responder HD security with remote start system has a shock
sensor used to detect intrusion attempts on your vehicle. The sensor
sensitivity can be adjusted to optimize your vehicle’s detection levels