Инструкции Пользователя для Viper LCD 2_Way

13

© 2013 Directed. All rights reserved.

Commands

13

Basic commands (Direct Access)

Lock

Press and release 

The doors lock and the horn honks (if connected) and 
parking lights flash once. The 

 text and beeps play to confirm 

and the System Status Icons update. If Valet mode* is On the doors 
lock and the 

 text and tone play. Exit Valet mode to Lock the 

system normally.

If the door was open when locking, you are notified of an active zone 
immediately after locking the system. The horn in the vehicle “honks” 
again. The 2-way remote control sounds a short “error” tone, and the 
LCD displays the door icon.
Note: the optional door input and horn honk must be connected for 
the system to give notification.

To Lock and Panic

Press and hold 

 

The system Locks (or Locks in Valet) and, after 2 seconds, sounds 
the horn and flashes the parking lights. The 

 text displays 

and horn honks to confirm. Press the 

or

 button to stop the 

output. 

Unlock

Press and release 

The doors unlock (if connected), and the horn honks (if connected) 
and parking lights flash twice. The 

 text and beeps play to 

confirm and the system status icons update. If Valet mode* is On the 
doors unlock and the  

 text and tone play.

ALL