Справочник Пользователя для Viking Huskylock 936
—31—
2-thread converter
4-3. Two thread overlock
1. Open the front cover.
2. Use one needle thread (left or right needle)
and lower looper thread.
3. Turn the handwheel toward you to move the
upper looper to the right side of the needle.
4. Hold the 2-thread converter by hand and
gently push it down.
Warning:
Pushing converter down too hard may bend
converter.
5. Insert the tip
➀
of the 2-thread converter into
the eye
➁
of the upper looper.
6. Close the front cover.
For 3-thread/4-thread overlock sewing, set 2-
thread overlock converter in the up position as
illustrated, by removing the tip
➀
out of the eye
➁
of the upper looper.
2
1