Справочник Пользователя для Venture Products VP100
5. D
ISPLAYS DESCRIPTIONS
Standard display at start-up
After start-up, the display shows the volume (attenuation level)
of -66dB, and the first input is activated (RCA)
of -66dB, and the first input is activated (RCA)
The volume can be modified through remote control or the
dedicated front knob, from –65dB (low volume) to 0dB (loud).
dedicated front knob, from –65dB (low volume) to 0dB (loud).
By using the remote control or selection knob, the different
inputs can be selected: RCA1, XLR2, RCA3, XLR4, RCA5,
XLR6, RCA7, XLR8, MM and MC.
inputs can be selected: RCA1, XLR2, RCA3, XLR4, RCA5,
XLR6, RCA7, XLR8, MM and MC.
MM input is selected as the 9
th
input of the preamplifier
(after XLR8)
MC input is selected as the 10
th
input of the preamplifier
(after MM)
By turning the Selection knob right, or using the remote control,
we process to the pink noise generator volume adjustment. It
shows initially the previous general volume level (before set-up).
we process to the pink noise generator volume adjustment. It
shows initially the previous general volume level (before set-up).
Still turning right the Selection knob, we process to the channels
balance. Balance is limited to a 9dB difference between
channels. We start with left channel.
balance. Balance is limited to a 9dB difference between
channels. We start with left channel.
Still turning right the Selection knob, we process to right
channel.
channel.
By turning right the Selection knob, we process to the subwoofer
phase selection, defaulted to 0°.
phase selection, defaulted to 0°.
By turning right the Volume knob, the phase is increased by
steps of 10° up to 180° (maximum).
steps of 10° up to 180° (maximum).
Page 14 / 22