Справочник Пользователя для Vertek/XTC Camcorder XTC280

midlandusa.com

5

The XTC280 was designed with an innovative identical dual track 

mount system on both sides of the camera.  This allows you to mount 

it on either side of a helmet with ease.  In addition, the interchangeable 

mount piece can be moved from the helmet mount to the goggle mount.  

This eliminates the hassle of having to remount the camera every time.

To mount the camera on the interchangeable mount piece, slide the 

camera onto the dual track system with the two notches on the mount 

facing toward the back of the camera.

To detach the camera from the interchangeable mount, hold the 

camera with the lens facing away from you.  Press down the mount 

release switch and pull the mount toward you.

When mounting the camera on a helmet, you must do the following:

1. Consider what you would like to shoot and mount the camera 

accordingly- left side, right side or top.

2. Find a flat surface and ensure the area is clean of dirt and debris.  

Remove the cover of the adhesive pad and adhere to the helmet.

3. Once attached, adjust the camera to be sure you are not filming the 

sky or the ground.

On the bottom of the XTC280 is a standard thread mount that allows 

the camera to be mounted to a tripod or other fixture with a 1/4-20 (1/4” 

diameter, 20 threads per inch) 5/16 deep thread.  For example, the vented 

helmet strap mount is a screw type mount.  To affix the camera, insert 

the screw on the mount into the camera thread and rotate the camera 

clockwise to tighten down onto the screw.

Aiming the Camera when mounted with the thread mount: 

When mounting the camera on the handlebars of a bike or with the 

vented helmet strap mount, follow these steps:

1. Consider what you would like to shoot and mount accordingly.

2. Once attached, make sure that the camera is aimed straight and not 

toward the ground or at the sky.

The Micro SD card can be reformatted while in the camera.  This allows 

you to delete all the videos at one time.  Follow these steps:

1. Move the RECORD switch to the Forward On / Record position.

2. When the battery indicator turns green, press and hold the Micro SD 

card reformat button.

3. Keep holding the Micro SD card reformat button down until the record 

indicator turns off and the Micro SD card indicator begins blinking 

green.

4. Move the RECORD switch to the off position.

Note: The camera cannot reformat the Micro SD card if the low 

battery light is on.