Справочник Пользователя для USRobotics 9630

Скачать
Страница из 70
Cordless Skype Dual Phone 
User Guide
7
Environment and Safety
Power Requirements: The product requires an electrical supply of 110–120 volts in North America and 
220–240 volts outside North America, single phase alternating current, excluding IT installations defined in 
standard EN/IEC 60950.
Battery Requirements: The handset requires power source of two rechargeable NiMH batteries, size AAA 
1.2V 650mAh (HR10/44).
 
Important Safety Instructions
Some of the following information may not apply to your particular product; however, when using telephone 
equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury 
Warning:
Skype is not a telephony replacement service. Any VoIP service used in conjunction with the Cordless 
Skype Dual Phone cannot be used for calls to emergency services or emergency telephone numbers 
(311, 911, 112, 999, etc.). Use a landline for calls to emergency services, such as police, fire, or 
ambulance.
If the base station of your Cordless Skype Dual Phone is connected to a PSTN (Public Switched 
Telephone Network) landline, you can make emergency calls using the handset connected to the base 
station.
Caution:Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or volt-
age can seriously damage the unit.
Warning:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-
rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries must be 
disposed of in accordance with the applicable waste disposal regulations.
Warning:
The electrical network is classified as dangerous according to criteria in the standard EN/IEC 60950. The 
only way to power down this product is by unplugging the power adapter from the electrical outlet. Ensure 
the electrical outlet is located close to the apparatus and is always easily accessible.
Base adapter
 
Input: 120 VAC 60 Hz
 
Output: 9 VDC 300 mA
Charger adapter
 
Input: 120 VAC 60 Hz
 
Output: 9 VDC 150 mA