Справочник Пользователя для Univex DB285USB

 

DB285USB

You can adjust a sound effect or tone quality to 
your preference.

● Setting the Z-Enhancer Plus

This unit is provided with 4 types of sound tone 
effects stored in memory.

Select the one you prefer.

∗

The factory default setting is “OFF”.

2-1. Select “Z-EHCR+”.

3-1. Each time you turn the [ROTARY] knob, 

the tone effect changes in the following 
order:

“OFF” ↔  “B-BOOST” ↔  “IMPACT” ↔  
“EXCITE” ↔  “CUSTOM ”

: no sound effect

B-BOOST : bass emphasized

: bass and treble emphasized

: bass and treble emphasized 

mid emphasized

CUSTOM : user custom

3-2. Press the [

] button.

3-3. Turn the [ROTARY] knob to adjust the 

setting in the range of 

–

3 to +3.

∗

The factory default setting is “0”.

3-4. Press the [

] button to return to the 

previous mode.

3-2. Press and hold the [

] button for 1 

second or longer. Bass/treble 
characteristics become flat and “FLAT” is 
show in the display.

3-3. Turn the [ROTARY] knob to change to the 

“OFF” mode.

● Adjusting the bass

This adjustment can be performed only when 
the Z-Enhancer Plus is set to “CUSTOM ”.

2-1. Select “BASS”.

3-1. Press the [

] button.

3-2. Press the [x] or [v] button to select as 

following order.

“B<G 0>” ↔ “B<F 60>” ↔ “Q 1”

3-3. Turn the [ROTARY] knob to adjust the 

gain, the F (center frequency) and the Q.

B<G 0> :The factory default setting is “0”.

(Adjustment range: 

+

7 to 

–

7)

B<F 60> :The factory default setting is 

“60”.

(Adjustment range: 60/80/100/

200)

:The factory default setting is “1”.

(Adjustment range: 1/1.25/1.5/2)

3-4. Press the [

] button to return to the 

previous mode.

1. Press the [SOUND] button to switch to the 

sound adjustment selection display.

∗

The factory default sound setting is “Z-
EHCR+”.

2. Then press the [x] or [v] button to 

select the sound adjustment mode.

Each time you press the [x] or [v] 
button, the sound adjustment mode 
changes as following order:

“Z-EHCR+” ↔ “BASS” ↔ “TREBLE” ↔ 
“BALANCE” ↔ “FADER” ↔ “NF VOL”

∗

In the case of display blinking “ENT”, you 
can press the 

[

]

 button to adjust the 

setting value.

∗

The sound adjustment mode will be 
displayed for 2 seconds before showing the 
sound setting.

3. Turn the [ROTARY] knob to adjust the 

selected audio mode.

4. After completing settings, press the 

[SOUND] button to return to the previous 
mode.