Справочник Пользователя для Univex DB285USB

DB285USB

 

● Setting the car speaker output for the 

When the AUX input jack is used to connect an 
AUX BLUETOOTH BB (BLT370) (sold 
separately):

∗

The factory default setting is “RIGHT”.

∗

To output the telephone calls, set the cellular 
phone interrupt to “ON”.

2-1. Select “TEL-SP”.

3-1. Turn the [ROTARY] knob to select “RIGHT” 

or “LEFT”.

• RIGHT:
Telephone calls can be heard on the front 
right speaker connected to this unit.

• LEFT:
Telephone calls can be heard on the front 
left speaker connected to this unit.

● Cellular phone interrupt setting

If you connect this unit and your cellular phone 
with a separately sold cable, you can listen to 
your telephone calls on your car speakers.

When the AUX input jack is used to connect an 
AUX BLUETOOTH BB (BLT370) (sold 
separately):

∗

The factory default setting is “OFF”.

2-1. Select “TEL-SW”.

3-1. Turn the [ROTARY] knob to select the 

setting. Each time you turn the [ROTARY] 
knob, the setting changes in the following 
order:

“OFF” ↔ “ON” ↔ “MUTE”

• OFF:
This unit continues normal operation even 
when the cellular phone is used.

• ON:
You can listen to your telephone calls from 
the speakers connected to this unit.

∗

When listening to your calls on your car 
speakers, you can adjust the volume by 
turning the [ROTARY] knob.

• MUTE:
The sound from this unit is muted during 
telephone calls.

This system has an external input jack on the 
front panel so you can listen to sounds and 
music from external devices connected to this 
unit.

● Selecting AUX IN sensitivity

Make the following settings to select the 
sensitivity when sounds from external devices 
connected to this unit are difficult to hear even 
after adjusting the volume.

∗

The factory default setting is “MID”.

1. Press and hold the [DISP] button for 1 

second or longer.

2. Select “AUX SENS”.

3. Turn the [ROTARY] knob to select “HIGH”, 

“MID” or “LOW”.