Справочник Пользователя для Symmetricom XLi IEEE 1588

1

Response (one of the following lines): 

OK - The PTP Option Card has been initialized to user entered values

To review the PTP reference clock configuration settings with respect to Master/Slave and reference 
clock Primary/Secondary/Standby settings, use the following format:

For example, enter: 

Response (example): 

F131 B4 C SLAVE PRI<CR><LF>

To change the settings, use the following format:

where:

For example, enter:

Response (one of the following lines): 

OK - Ref Clock Configuration has been received and applied by the PTP Option Card

The PTP reference clock configuration settings are saved in XLi NVRAM so they can be used to 

initialize the PTP option card with Master/Slave and Pri/Sec/Stby selections at XLi power-up.

F

= ASCII character F

131

= unit function number

<SP>

= space

B

= ASCII letter to denote Option Bay number follows

<N>

= Option Bay Number, 1 through 4.

C

= specify PTP Configuration command

<MS>

= MASTER or SLAVE (Factory Default is MASTER)

<CONFIG> = PRI, SEC or STBY, which must be entered if the <MS> is SLAVE.

If the <MS> is MASTER, this field is not applicable.