Справочник Пользователя для Sun Microsystems SUN FIRE X4640
SIA Installation Log File
An SIA log file is written to the root directory of the newly installed system.
To review this log file, refer to the file SunInstallationAssistant.log (located at /root for
Linux.
Linux.
ILOM Remote Console Mouse Issue With SIA
The ILOM Remote Console has a mouse mode setting that configures ILOM to send mouse
events to the remote system using either “absolute” or “relative” mode. For the ILOM Remote
Console to work properly with SIA, you must configure the mouse setting to relative mode. If
your mouse is set to absolute mode, your mouse will not work when using SIA. For more
information, see
events to the remote system using either “absolute” or “relative” mode. For the ILOM Remote
Console to work properly with SIA, you must configure the mouse setting to relative mode. If
your mouse is set to absolute mode, your mouse will not work when using SIA. For more
information, see
Debugging Unattended Installation Problems
This section includes procedures for debugging common problems that might occur when
setting up an unattended network installation:
setting up an unattended network installation:
■
■
■
▼
How to Debug a PXE Image That Does Not Boot
Check the DHCP and TFTP server areas and the integrity of the initrd.img and vmlinuz files.
Verify that the kernel boot arguments are correct by consulting the PXE-example configuration
(boot/isolinux/isolinux.cfg) provided on the SIA CD/DVD.
(boot/isolinux/isolinux.cfg) provided on the SIA CD/DVD.
Verify that the URLs in the SIA state file, Kickstart file, or AutoYaST file are correct. To determine
whether the URLs are correct:
whether the URLs are correct:
a. Test the URL with the command wget
URL.
b. Verify that the DNS is working or use IP addresses instead of host names.
c. Check the following table for URL errors that you might encounter.
1
2
3
SIA Installation Log File
Sun Installation Assistant 2.2 User's Guide for the Sun Fire X4640 Server • October 2009, Rev. A
60