Справочник Пользователя для StarTech.com CONYX ECS0016

Instruction Manual

34

Enter the Username and Password used to login into the RPC  (Note 

8. 

that these login credentials are not related the Users and access 
privileges you will have configured in 

Groups).
Check Log Status and specify the Log Rate (minutes between 

9. 

samples) if you wish the status from this RPC to be logged. These logs 
can be views from the 

Status: RPC Status screen.

Click Apply.

10. 
Note:  The Management Console has support for a growing number of 
popular network and serial PDUs. If your PDU is not on the default list it is 
simple to add support for more devices.
IPMI service processors and BMCs can be configured so all authorized 
users can use the Management Console to remotely cycle power and 
reboot computers, even when their operating system is unresponsive. To 
set up IPMI power control, the Administrator first enters the IP address/
domain name of the BMC or service processor (e.g. a Dell DRAC) in 
Serial & Network: Network Hosts, then in Serial & Network: RPC 
Connections specifies the RPC Type to be IPMI1.5 or 2.0
RPC Alerts 
You can now set PDU and IPMI alerts using

RPC Status 
You can monitor the current status of your network and serially connected 
PDUs and IPMI RPCs

Select the 

1. 

Status: RPC Status menu and a table with the summary 

status of all connected RPC hardware will be displayed