Справочник Пользователя для Sony MP595

Configuring the Wireless Access Point

Rev 1.5 Jul.08

Enable the wireless access point

By default the wireless access point is disabled. To enable the
wireless access point:

In Watcher, select

Tools > Options > MP > Wireless Access

Point > Current

and enter the current password. (The default

password is

MP3G

Select

Tools > Options > MP > Wireless Access Point

Under Configuration, select the

Enable Wireless Access

Point

field and from the drop‐down menu, select

Yes

If you want to change more settings, proceed to the appro‐
priate sections. Otherwise click

to automatically reset

the modem.

Set the SSID

Note: If you want to use Watcher to configure the SSID and security
settings, connect the modem to the laptop via an Ethernet cable.
Once the MP modem is configured, you can remove the Ethernet
cable.

The SSID is the name of the network that appears in the list of
computer network settings. The default SSID is in the format
MPxxxW‐FSN, where xxx is the model number and FSN is the
factory serial number.
For example, MP 595‐B452927000310.

There is no need to change the SSID, but you can if desired. If
you have more than one MP modem and you are changing the
SSID, be sure to assign a unique SSID to each MP modem.

To change the SSID:

Unlock the MP modem configuration. In Watcher, select

Tools > Options > Wireless Access Point > Password > Current

and enter the current password. (The default password is