Справочник Пользователя для Sound Performance Lab 2269

For connection of the source signal, which will be routed to the eight outputs. 
Use 1/4” TRS (stereo) plugs for balanced connections and 1/4“ TS (mono) 
plugs for unbalanced signals. Maximum input level is +19 dBu.

These connectors provide the balanced SEND signals from stereo channels 
1 to 4 for connection to processor inputs. A send channel will only carry the 
input signal if the corresponding switch is activated. Standard adapter cables 
are readily available for these connections (Sub-D > XLR male or female or 
Sub-D > 1/4“). 

The Sub-D connectors are wired according to the Tascam standard:

The numbers on the cables correspond to the Router send channels as 

follows:

1  

 

Send 1 Left 

 

2  

 

Send 1 Right

3  

 

Send 2 Left

4  

 

Send 2 Right

5  

 

Send 3 Left

6  

 

Send 3 Right

7   Send 

4 

Left

8 

 

Send 4 Right

Example: if switch 1 is activated, the left side of the stereo signal is present at 
cable no. 1 and the right side at cable no. 2. Switch 2 routes the stereo signal 
to cables 3 and 4 and so on.

  

} 

1

} 

2

} 

3

} 

4